| Nominal Frequency | 12.000 MHz |
| Vibration Mode | AT Fund. |
| Operation Temperature Range | -40~+85 |
| Storage Temperature Range | -40~+85 |
| Drive Level | 100W |
| Load Capacitance | 20 pF |
| Frequency Tolerance | 30ppm |
| Equivalent Resistance | 80 |
| Temperature Characteristics | 20ppm |
| Shunt Capacitance | 7pF |
| Insulation Resistance | 500M/10015V DC |
| Aging Characteristics | 5ppm/year |
| Drop Characteristics (Condition) | Height 50cm, 3 times, test after 1 hour |
| Drop Characteristics (Standard) | Frequency change5ppm, Rr as specification |
| Shake Characteristics (Condition) | Shake frequency 10~55Hz, cyc1~2 minutes, swing 1.5mm, direction x/y/z, all 30 minutes. Test after 1 hour |
| Shake Characteristics (Standard) | Frequency change5ppm, Rr as specification |
| Airproof Characteristics (Condition) | Put crystal into the pressure cabin with alcohol, keep pressure 0.4-0.5mpa 10 minutes, then take out and blow for 5 minutes |
| Airproof Characteristics (Standard) | IR500 m |
| Weld Characteristics (Condition) | 23553 seconds |
| Weld Characteristics (Standard) | 90% adhibit tin ok |
| Humidity Characteristics (Condition) | 402, humidity 90-95%, 250 hours. |
| Humidity Characteristics (Standard) | Frequency change5ppm, Rr as specification |
| Low Temperature Characteristics (Condition) | -302, after 250 hours, put in room temperature 1 hour |
| Low Temperature Characteristics (Standard) | Frequency change5ppm, Rr as specification |
| High Temperature Characteristics (Condition) | 852, after 250 hours, put in room temperature 1 hour |
| High Temperature Characteristics (Standard) | Frequency change5ppm, Rr as specification |
| Temperature Cycling (Standard) | Frequency change5ppm, Rr as specification |
| Reflow Examination (Standard) | Frequency change10ppm, Rr as specification |
